MRI Equipment
Request our Catalog

MRI Non-Magnetic Magellan 2200, Model-3 Anesthesia Machine

SKU: VE-3002
MRI Non-Magnetic Magellan 2200, Model-3 Anesthesia Machine
 
Model 3 is the smallest and lightest of the Magellan line of anesthesia machines. Vaporizer is included(customer's choice of agent at no extra charge) as is oxygen monitor and transport case.
Designed for portable medical mission use, Model 3 is full featured, without a ventilator.

Agent Choices: Customer must choose one at the time the order is placed:

Sevoflurane Vaporizer

Isoflurane Vaporizer


Specifications
Dimensions
Height 14.5-inches
Width 12-inches
Depth 8-inches

Weight:
Free Standing 29 lbs. fully equipped
Shipping Weight 40 lbs.
 
Machine Materials: Aluminum, brass and plastic
 
Carrying Case Materials: Plastic, military grade
 
Operating Temperature Range: 35 degrees F to 95 degrees F
 
Recommended Gas Supply Sources:
O2 Main and Cylinders 45 psi to 55 psi (50 psi is optimal)
Air Main, Cylinders and/or 45 psi to 55 psi (50 psi is optimal)
Air Compressors
 
Flowmeter Fresh Gas Flow: Calibrated and scaled 0-15 lpm > 30 lpm.
 
Oxygen Flush Valve: Recessed, self-closing, push-button, color coded, and labeled, provides 45-55 lpm constant flow, while pushbutton is depressed.
 
CO2 Absorber: King Systems KAB-1, pre-filled or refillable
 
CO2 Absorber Canister Capacity: 400 grams soda lime
 
Directional Valves: Built in the CO2 Absorber
 
CO2 Absorber Mounting Bracket: Plastic, secured with knob to main frame of machine
 
Pressure Relief Valve: Attached to Bag/Gauge/PRV Arm
 
Common Gas Outlet: Quick-Connect, Size Indexed
 
Tubing Circuit: King Systems F-360-61 or any standard anesthesia circle
 
Gas Pressure Hoses: DISS and Thread indexed, female connectors at both ends
 
Gas Inlet Manifold: DISS, Thread indexed male connectors with one way valves with separate filters and filter spacers
 
Gas Inlet Pressure Regulators:
Main Supply Cylinder
DISS and Thread indexed for Oxygen and Air
Safety back-up Cylinder
Pin-Indexed, Yoke-mounted for "D” and "E” cylinders
 
Oxygen and Air Supply Gauges: 0-3000 psi range, color-coded and clearly labeled
 
Oxygen Supply Alarm: Pneumatically actuated when supply pressure falls below 30 psi (mains)
 
Alarm Power Source: 9-volt battery located in body of alarm container
 
Air and Oxygen Flowmeters: Calibrated and scaled 0-10 lpm, color coded, O2 flowmeter has fluted knob for easy identification by touch
 
Oxygen Analyzer/Monitor: Maxtec OM-25ME galvanic cell sensor, sensor-life expectancy of 2 years under normal conditions
 
Oxygen Analyzer Power Source: 2 each AA batteries, life expectancy approx 3000 use-hours
 
Auxiliary O2 Flow Selector: Scaled 0-10 lpm in set increments, used for pre/post anesthesia oxygen administration with nasal cannula mask
 
Vaporizer: Penlon Sigma Delta series, bolt (cage) mounted
 
Patient Pressure Gauge: Mounted on front side of Bag/PRV Scavenger Arm, + 60 cmH2O to -60 cmH2O
 
Total Machine Gas Leakage:
@30 cmH2O -0- ml/min
@80 cmH2O -0- ml/min
 
Internal System Compliance:
@20 cmH2O 1.1 ml/cmH2O
@40 cmH2O 1.3 ml/cmH2O
 
Internal System Resistance:
@1.0 L/sec gas flow 4.11 cmH2O
@0.5 L/sec gas flow 1.80 cmH2O
 
APL Valve Pressure Drop:
@3.0 l/min gas flow 0.12 cmH2O
@30 l/min gas flow 1.03 cmH2O
 
Storage Temperature:
Indoors + 122 degrees F
Outdoors - 15 degrees F
(Allow unit to warm to normal operating room temperature for at least one hour)

Magellan-2200 Model 3 Anesthesia Machine

Non-clinical testing demonstrated that this product is MR Conditional and can be used in the MRI environment according to the following conditions:

Static magnetic field of 3-Tesla or less

Highest spatial gradient magnetic field of 720-Guass/cm or less

Important Note: This product is intended for use inside of the MRI environment (e.g., in the MR system room, close to the scanner0. However, it should not be utilized directly inside of the MR system (e.g., inside of the bore of the scanner), itself.


Price: $12,540.00
MRI Non-Magnetic Magellan 2200, Model-3 Anesthesia Machine
MRI Non-Magnetic Magellan 2200, Model-3 Anesthesia Machine
Product Reviews
Rate this product:  1   2   3   4   5 

About MRIequip.com

Now, at your fingertips, is a diverse line of Non-Ferrous and PVC products for your MRI environment. MRIequip.com was established to provide the highest quality MRI compatible equipment with price tags significantly lower than the current marketplace.

Safety is Our Business.

Address

MRIequip.com
6248 Bittersweet Lane
Nisswa, MN 56468
Toll Free: 866-529-3526
Fax Free: 888-433-5174
Hours: 7-4:30 PM (CST) M-F