MRI Equipment
Request our Catalog

MRI Non-Magnetic De-Ionized Water Fire Extinguisher

SKU: FE-10XX
MRI Non-Magnetic De-Ionized Water Fire Extinguisher
 
The ultimate extinguisher for class A fires, especially where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of the burning materials. Unequivocally the best extinguisher for hospital environments, telecommunications facilities and "clean room” manufacturing facilities. The extinguisher can safely be mounted within the MRI room.

Non-magnetic construction tested by an Independent Agency for use in MRI Facilities
THIS EXTINGUISHER IS RATED TO 11.7 TESLA(including the wall bracket)
 
Environmental Friendly :
No O.D.P
No EPA phase out or restrictions
No Global warming concerns
Non magnetic construction (Models B270NM / B272NM)
 
Clean :
No toxicity
No respiratory concerns
De-ionized water extinguishing agent
Exclusive crevice free, butt welded cylinder
Antiseptic white paint finish (easy to clean interior & exterior)
No powder residue
 
User Friendly :
Wand provides greatest operator safety
Maximum visibility during discharge
No electrical conductivity back to the operator
No thermal or static shock
Minimal training - simplest to use, least expensive agent available
 
1 3/4 Gallon Fire Extinguisher
Specifications:
Application: Hose & Wand
U/L Rating: 2A:C
Extinguisher Height: 24 1/2"
Height with Hose and Wand Installed in Clips: 25"
Width with hose and Wand Installed in Clips: 14" without hose and clips: 11"
Depth (diameter): 7"
Range (feet): 10' - 12'
Discharge Time: 72 Seconds
Standard Bracket: Wall
Model # FE-1004
 
2 1/2 Gallon Fire Exinguisher
Specifications:
Application: Hose & Wand
U/L Rating: 2A:C
Extinguisher Height: 24 1/2"
Height with Hose and Wand Installed in Clips: 27 1/2"
Width with hose and Wand Installed in Clips: 14"
Depth (diameter): 7"
Range (feet): 10' - 12'
Discharge Time: 80 Seconds
Standard Bracket: Wall
Model # FE-1000
 
 
Filling requires the use of a nitrogen pressurizing source set at no more than 125 PSI. The Fill Adapter is required for the refilling process and replaces the wand during such process. This will be needed by most professionals to handle the refilling process.

Extinguishers are not shipped filled.  Contact a local filling service near you.
Price: $213.20
MRI Non-Magnetic De-Ionized Water Fire Extinguisher
MRI Non-Magnetic De-Ionized Water Fire Extinguisher
Product Reviews
Rate this product:  1   2   3   4   5 

About MRIequip.com

Now, at your fingertips, is a diverse line of Non-Ferrous and PVC products for your MRI environment. MRIequip.com was established to provide the highest quality MRI compatible equipment with price tags significantly lower than the current marketplace.

Safety is Our Business.

Address

MRIequip.com
6248 Bittersweet Lane
Nisswa, MN 56468
Toll Free: 866-529-3526
Fax Free: 888-433-5174
Hours: 7-4:30 PM (CST) M-F