MRI Equipment
Request our Catalog

MRI Compatible Emergency VR1 Ventilator w/Regulator and Circuit

SKU: VE-4004
MRI Non-Magnetic Emergency and Transport Ventilator
 
The emergency ventilator is designed for caregivers wherever breathing failure emergencies occur: in hospitals, industrial or commercial setting, transport situations, or remote locations. The unit's simplicity, portability, and saftey make it the ideal choice for emergency ventilation. A single control for setting the frequency and tidal volume, including a click-stop setting at the recommended adult position, enables rapid set-up in demanding circumstances. Auto/manual controls, a patient demand system, MRI compatibility, and other features provide the means to manage respiratory emergencies. 
 1 Year Warranty
 
Technical Specifications
- Principle of Operation
  Oxygen powered, hand-held control unit with
  patient valve including automatic and manual
  modes with demand breathing
 
- Manual Mode
  Preset breaths, singly or in a controlled
  breathing pattern may be selected by use
  of a push-button or omni-directional lever
 
- Automatic Mode 
  The ventilatory resuscitator cycles in
  accordance with the setting of a single control
  that changes the tidal volume and frequency
  dependently with a constant I:E ratio of 1:2
 
- Patient Type
  Patients above 10kg with and without
  spontaneous breathing
 
- Demand
  Included
 
- Control
  Single, calibrated, tidal volume/frequency
  control gives simultaneous and inter-
  dependent adjustment of tidal volume
  and frequency
 
- Tidal Volume and Frequency
  150 ml/25 bpm 750 ml/11
  300 ml/20 bpm 900 ml/10 bpm
  450 ml/15 bpm 1050 ml/10 bpm
  600 ml/12 bpm (detent)
 
- Flow Range
  11-32 L/min
 
- Air Mix
  No
 
- Pressure Relief with Pneumatic Alarm
  40 cm H2O standard
  60 cm H2O optinal when purchased
 
- Dimensions
  Length: 6.69 inches (170 mm)
  Width:  3.74 inches (95 mm)
  Height: 3.94 inches (100) including patient valve
Price: $3,063.00
MRI Compatible Emergency VR1 Ventilator w/Regulator and Circuit
MRI Compatible Emergency VR1 Ventilator w/Regulator and Circuit
Product Reviews
Rate this product:  1   2   3   4   5 

Products Determined to be MR Conditional at 7-T or Less

Now, at your fingertips, is a diverse line of Non-Ferrous and Stainless Steel products for your MRI environment that are MR Conditional at 7-T or less. These items tested represent many of the important patient support products that are commonly used in clinical MRI environments.

Stainless Steel Products Determined to be MR Conditional at 7-T or Less
Non-Ferromagnetic Products Determined to be MR Conditional at 7-T or Less

Address

MRIequip.com
6248 Bittersweet Lane
Nisswa, MN 56468
Toll Free: 866-529-3526
Fax Free: 888-433-5174
Hours: 7-4:30 PM (CST) M-F