MRI Equipment
Request our Catalog

MRI Non-Magnetic Pneumatic Transport Ventilator

SKU: VE-5000
MRI Non-Magnetic Pneumatic Transport Ventilator

A small, lightweight transport ventilator designed for use on patients from pediatric to adult in size.
This ventilator has simple -to-use controls for volume-targeted or pressure-limited ventilation.  With a built-in high output demand flow CPAP system, critical care ventilation needs are optimized for spontaneous and mandatory breaths.  Operating without the need of electrical power, the ventilator can care for the most difficult patients wherever they may be located.
Use this ventilator as your key to an all hazards approach to mechanical ventilatory support.  Be prepared for any emergency or loss of electrical power.
Use this ventilator in your ambulance, on your aircraft, within MRI or wherever you need mechanical ventilation.

Benefits
All pneumatic operation, no batteries or external power needed to provide ventilation
Switch from noninvasive face mask ventilation to invasive ventilation seamlessly and without interruption
Low spontaneous work of breathing compared to
other transport ventilators
Built-in CPAP / PEEP system with automatic sensitivity
for changing patient needs means no need for external CPAP valves
Mandatory and spontaneous breaths at 100% or use 65% oxygen to prolong your oxygen tanks
MRI compatible with remote alarm capability so you can meet patient needs in your special procedure areas
Integrated all-pneumatic alarm system keeps you
alerted to patient circuit disconnects and a low gas supply

Designed for ventilating patients in pre-hospital and hospital areas
  • Disaster Preparation
  • Air / Ground Ambulance
  • Emergency Department
  • In-Hospital Transports
  • Intensive Care Unit
  • Post-Anesthesia Recovery Rooms
  • MRI and other Radiology Suites
  • Military Field Hospital and Evacuation
  • Recommended VE-5001 & VE-5002(Remote Alarm with Cable) for use with this product
 

Description:

Pneumatically operated

Intended for use on pediatric/adult patients, 23 kg and above

Demand flow system for spontaneous breathing up to 140 L/min

Pressures displayed on manometer

Modes of Operation: IMV, CPAP

Mandatory breath flow rate is fixed at 36 L/min

Visual and audible patient disconnect alarm system with remote output for use in areas where the patient cannot be directly monitored (MRI)

MRI compatible: up to 3.0 T static field strength, 6.9 G/cm spatial field gradient, 300 V RF power, shielded

Weight: 6.6 pounds  (3.0 kg)

Dimensions: 5"H x 10"W x 7"D (13 x 25 x 18 cm)

Input gas requirement: 55 psi + 15 psi (3.8 bar + 1 bar)

Meets International Standards for transport Ventilators: ~ ASTM:  Ventilators Intended for Use in Critical Care (F 1100-90)    ~ ISO: Lung Ventilators for medical use, Part 3 (10651-3)

 
Control Settings:

   Parameter
  Range
Mandatory Breaths
On or Off
Respiratory Rate
3 - 50 bpm
Tidal Volume
360 - 1,500 ml
Peak Pressure
15 - 75 cmH2O
PEEP / CPAP
0 - 20 cmH2O
Oxygen
100% or 65%

 


Visual and Audible Alarms:
All pneumatic alarm system (no batteries) that is always on
Patient circuit disconnection
Low oxygen inlet pressure (below 30 psi)
Automatic reset
1 minute silence / reset button
Remote alarm output
Price: $7,600.00
MRI Non-Magnetic Pneumatic Transport Ventilator
MRI Non-Magnetic Pneumatic Transport Ventilator
MRI Non-Magnetic Pneumatic Transport Ventilator
MRI Non-Magnetic Pneumatic Transport Ventilator
MRI Non-Magnetic Pneumatic Transport Ventilator
MRI Non-Magnetic Pneumatic Transport Ventilator
(Click to see larger image and other views)
May we also suggest…
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.
Product Reviews
Rate this product:  1   2   3   4   5 

About MRIequip.com

Now, at your fingertips, is a diverse line of Non-Ferrous and PVC products for your MRI environment. MRIequip.com was established to provide the highest quality MRI compatible equipment with price tags significantly lower than the current marketplace.

Safety is Our Business.

Address

MRIequip.com
6248 Bittersweet Lane
Nisswa, MN 56468
Toll Free: 866-529-3526
Fax Free: 888-433-5174
Hours: 7-4:30 PM (CST) M-F